Cognitive Science Visualization

Purpose

This skill encodes domain-specific visualization knowledge for cognitive science and neuroscience. It covers which plot types to use for different data types, field conventions for brain data visualization, color accessibility standards, and publication formatting requirements. A general-purpose data scientist would produce suboptimal or misleading figures without this knowledge.

When to Use This Skill

• Creating figures for a cognitive science or neuroscience manuscript

• Visualizing RT distributions, ERP waveforms, fMRI results, or behavioral data

• Choosing colors, scales, and formatting for publication

• Reviewing whether a figure follows field conventions and accessibility standards

Research Planning Protocol

Before creating visualizations, you MUST:

• State the purpose — What message should this figure communicate? What comparison or pattern should be visible?

• Justify the plot choice — Why this plot type? What alternatives were considered?

• Declare the target audience — Journal submission, conference poster, internal review?

• Note potential misrepresentations — Could this visualization mislead? Are axes, scales, or colors appropriate?

• Present the plan to the user and WAIT for confirmation before proceeding.

For detailed methodology guidance, see the research-literacy skill.

⚠️ Verification Notice

This skill was generated by AI from academic literature. All parameters, thresholds, and citations require independent verification before use in research. If you find errors, please open an issue.

Plot Type Selection by Data Type

Behavioral Data: RT Distributions

Use raincloud plots, NOT bar charts.

Bar charts with error bars conceal the distribution shape, hide bimodality, and can obscure important effects (Weissgerber et al., 2015). Cognitive science RT data are characteristically right-skewed with potential multimodality.

Recommended: Raincloud plots combine a half-violin (density), individual data points (jitter), and a boxplot summary (Allen et al., 2019).

Plot Type When to Use When to Avoid

Raincloud plot RT distributions, any continuous DV Very large N where individual points overlap completely

Violin plot Distribution shape comparison across conditions When individual data points matter

Strip/jitter plot Small to moderate N (< 100 per condition) Very large N (overplotting)

Box plot Quick summary; supplements other plots As the only visualization (hides distribution shape)

Bar chart with error bars Avoid for continuous data Almost always; use for counts/proportions only

Histogram Examining RT distribution of a single condition Comparing across many conditions (hard to overlay)

Behavioral Data: Accuracy and Proportions

• Dot plots with within-subject CI: Show condition means with dots and individual subject data points connected by lines (for within-subjects designs)

• Within-subject confidence intervals: Use the Morey (2008) correction for repeated-measures CI -- standard CIs are inappropriate for within-subjects designs because they include between-subject variance

• Calculation: Remove each subject's mean, add back grand mean, then compute standard CI (Cousineau, 2005; Morey, 2008 correction factor: multiply SE by sqrt(k / (k-1)) where k = number of conditions)

Interaction Plots

• Use line plots (condition x time or condition x group) with individual trajectories shown as thin semi-transparent lines behind the group means

• For 2x2 designs: plot the continuous variable on x-axis, DV on y-axis, and use color/linetype for the second factor

• Always show error bars (within-subject CI for repeated measures; Morey, 2008)

ERP Visualization Conventions

Waveform Plots

Polarity convention: There is a longstanding debate about whether to plot negative up or negative down.

Convention Prevalence Journals

Negative up Traditional in ERP research Psychophysiology, most dedicated ERP journals

Negative down Increasingly common; standard mathematical convention Some cognitive neuroscience journals, Clinical Neurophysiology

Recommendation: Follow the target journal's convention. If in doubt, negative up is the traditional ERP convention (Luck, 2014, Ch. 3). Always label the y-axis clearly with polarity.

Waveform Plotting Standards

• Line width: 1.0-1.5 pt for condition waveforms; 0.5 pt for axis lines (Luck, 2014)

• Color: Use colorblind-safe palette; distinguish conditions by both color AND linetype (solid, dashed)

• Time axis: Mark stimulus onset (0 ms) with a vertical dashed line

• Amplitude axis: Label in microvolts (uV); include zero line

• Baseline period: Shade or mark the pre-stimulus baseline period (typically -200 to 0 ms)

• Component windows: Shade or bracket the time window of interest (e.g., N400: 300-500 ms; Kutas & Federmeier, 2011)

• Grand average: Plot grand average waveforms; optionally show individual subject waveforms as thin semi-transparent lines

Difference Waves

• Plot the difference wave (condition A minus condition B) as a separate panel or overlaid in a distinct color

• Include the 95% CI or standard error band around the difference wave

• Difference waves are essential for verifying that an effect is present before interpreting the grand average (Luck, 2014, Ch. 2)

Topographic Maps

• Plot at specific time points or averaged within the component time window

• Use a diverging colormap (blue-white-red or blue-zero-red) centered on zero (Crameri et al., 2020)

• Include a color bar with labeled range (in uV)

• Show electrode positions as dots on the map

• Use consistent scale across conditions for fair comparison

• Common time windows: N1 (80-120 ms), P2 (150-250 ms), N400 (300-500 ms), P600 (500-800 ms) (Luck, 2014)

fMRI Visualization Standards

Statistical Map Overlays

• Never use jet/rainbow colormap (Borland & Taylor, 2007; Crameri et al., 2020). These colormaps introduce perceptual artifacts: perceived boundaries where none exist, and unequal perceptual steps.

• Recommended colormaps:

Purpose Colormap Source

Sequential (activation) hot, inferno, YlOrRd Crameri et al., 2020

Diverging (activation + deactivation) RdBu_r, coolwarm, vik Crameri et al., 2020

Perceptually uniform viridis, magma, cividis Crameri et al., 2020

fMRI Display Types

Display When to Use Tool

Orthogonal slices Showing peak activation in a specific region nilearn plot_stat_map

Glass brain Whole-brain overview; showing distributed patterns nilearn plot_glass_brain

Surface projection Publication-quality cortical activation maps nilearn plot_surf_stat_map , FreeSurfer

Montage (multi-slice) Showing extent of activation across brain nilearn plot_stat_map with display_mode='z' and cut_coords

fMRI Visualization Requirements

• Always show a color bar with the statistic scale (z-score or t-value)

• Report the threshold used (e.g., "z > 3.1, cluster-level p < 0.05 FWE")

• Report coordinate space (MNI-152 or Talairach) and template

• Show both hemispheres unless the hypothesis is lateralized

• For ROI analyses, overlay the ROI mask on an anatomical image

• Use 1 mm isotropic anatomical underlay (MNI152 T1 template) for sufficient anatomical detail

What NOT to Do in fMRI Figures

• Do not use 3D rendered brains with inconsistent lighting and angles (obscures data)

• Do not show only a single slice cherry-picked to show the largest effect

• Do not use an overly liberal threshold to make results "look better" (threshold must match the reported statistics)

• Do not use jet/rainbow (Borland & Taylor, 2007)

Brain Connectivity Visualization

Matrix Plots (Connectivity Matrices)

• Order regions by network membership (e.g., DMN, FPN, visual, motor) to reveal modular structure

• Use hierarchical clustering to determine optimal ordering if no a priori network assignment

• Use a sequential colormap for positive-only connectivity (e.g., correlation: viridis)

• Use a diverging colormap for signed connectivity (e.g., partial correlation: RdBu_r centered on zero)

• Annotate network boundaries with grid lines or color bars along axes

Chord Diagrams / Connectome Plots

• Use for showing specific significant connections

• Line width proportional to connection strength

• Color by network membership of source or target

• Use mne-connectivity or nilearn plot_connectome for 3D brain-space visualization

Color Accessibility

Mandatory: Colorblind-Safe Palettes

Approximately 8% of males and 0.5% of females have color vision deficiency (Birch, 2012). All figures must be interpretable by colorblind readers.

Recommended palettes:

Palette Type Colors Source

viridis Sequential Yellow-green-blue-purple Crameri et al., 2020

cividis Sequential (optimized for CVD) Yellow-blue Nuñez et al., 2018

Okabe-Ito Categorical (8 colors) #E69F00, #56B4E9, #009E73, #F0E442, #0072B2, #D55E00, #CC79A7, #000000

Okabe & Ito, 2002

viridis family (magma, inferno, plasma) Sequential Various Crameri et al., 2020

RdBu Diverging Red-white-blue ColorBrewer; Crameri et al., 2020

Color Usage Guidelines

• Never rely on color alone to convey information; use shape, linetype, or labels as redundant cues (WCAG 2.1 guideline 1.4.1)

• For categorical comparisons, limit to 6-8 colors maximum (Miller, 1956 -- chunking limit; also practical perceptual limit)

• Test figures with a CVD simulator (e.g., Coblis, Color Oracle) before submission

• Avoid red-green contrasts (most common CVD is deuteranopia/protanopia)

Publication Formatting Standards

APA 7th Edition Figure Requirements

Parameter Specification Source

Resolution 300 DPI minimum for print; 600 DPI for line art APA 7th, 2020, Section 7.22

Font Sans-serif (Arial, Helvetica) 8-14 pt in the final printed figure APA 7th, 2020, Section 7.22

Line weight 0.5-1.5 pt minimum for visibility after reduction APA 7th, 2020

Figure width Single column: 3.3 in (84 mm); double column: 6.9 in (175 mm) Typical journal specifications

File format TIFF or EPS for print; PDF for vector; PNG for screen Journal-specific

Color mode CMYK for print; RGB for online-only Journal-specific

Background White (no gray backgrounds, no gridlines unless essential) APA 7th, 2020

Axis and Label Standards

• Axis labels: Capitalize first word and proper nouns only (sentence case)

• Axis values: Use appropriate precision (RT in ms with 0 decimal places; effect sizes to 2 decimal places)

• Error bars: Always define what they represent in the figure caption (SE, 95% CI, within-subject CI)

• Legend: Place inside the plot area if space permits; avoid obscuring data

• Panels: Label multi-panel figures with (A), (B), (C) in bold, upper-left corner, 12 pt font

Common Formatting Mistakes

• Font too small after scaling: A figure designed at full-screen size will have illegible text when reduced to column width. Design at the final printed size.

• Axis starting at non-zero: For RT data, the y-axis should generally start at 0 ms to avoid exaggerating small differences. Exception: when the effect is small relative to the baseline and breaking the axis is standard in the field.

• Missing error bars or undefined error bars: Every figure with summary statistics must include error bars, and the caption must state what they are (Cumming & Finch, 2005).

• Inconsistent scales across panels: When comparing conditions or time points across panels, use the same axis range.

• 3D bar charts: Never use 3D effects on statistical plots; they distort perception of values (Tufte, 2001).

Common Visualization Mistakes in Cognitive Science

1. Bar Charts for Continuous Data

Problem: Bar charts conceal distribution shape, bimodality, outliers, and sample size (Weissgerber et al., 2015). Fix: Use raincloud plots, violin plots, or strip plots that show individual data points.

2. Dynamite Plots (Bar + SE)

Problem: Two very different distributions can produce identical bar + SE plots (Weissgerber et al., 2015). Fix: Show the data. At minimum, overlay individual data points on any summary plot.

3. Rainbow/Jet Colormaps for Brain Images

Problem: Perceptually non-uniform; creates false boundaries; misleads interpretation of gradients (Borland & Taylor, 2007). Fix: Use perceptually uniform colormaps (viridis, inferno, magma) or scientifically designed colormaps (Crameri et al., 2020).

4. Between-Subject Error Bars on Within-Subject Designs

Problem: Standard error bars include between-subject variance, which is irrelevant for within-subject comparisons (Loftus & Masson, 1994). Fix: Use within-subject CIs (Morey, 2008; Cousineau, 2005).

5. Cherry-Picked Brain Slices

Problem: Showing only the single slice with the largest activation cluster misrepresents spatial extent. Fix: Show a montage of slices or a glass brain projection; share full unthresholded maps on NeuroVault.

6. Unlabeled Color Scales on Brain Maps

Problem: Without a labeled color bar showing the statistical range, the reader cannot interpret the image. Fix: Always include a color bar with the statistic type (z, t, F) and the numerical range.

7. Inconsistent ERP Polarity

Problem: Mixing negative-up and negative-down within the same paper or comparing across papers without noting the convention. Fix: State the polarity convention; label the y-axis clearly; be consistent throughout.

8. Not Showing Individual Data

Problem: Group means alone can mask important individual variability (e.g., bimodal response patterns in clinical populations). Fix: Overlay individual data points (jitter/strip) or show small-multiples of individual subjects.

Quick Reference Decision Table

Data Type Recommended Plot Tool Recipe Reference

RT distribution Raincloud plot ggrain (R) / PtitPrince (Python) references/plot-recipes.md Recipe 1

ERP waveform Line plot with CI band MNE-Python / ggplot2 Recipe 2

ERP topography Topographic map MNE-Python plot_topomap

Recipe 3

fMRI activation Glass brain or surface nilearn Recipe 4

Accuracy by condition Dot plot with within-subject CI ggplot2 / matplotlib Recipe 5

Group comparison Estimation plot (Gardner-Altman) DABEST / dabestr Recipe 6

Time-frequency TFR heatmap MNE-Python Recipe 7

Correlation matrix Clustered heatmap seaborn / corrplot Recipe 8

References

• Allen, M., Poggiali, D., Whitaker, K., Marshall, T. R., & Kievit, R. A. (2019). Raincloud plots: A multi-platform tool for robust data visualization. Wellcome Open Research, 4, 63.

• American Psychological Association. (2020). Publication Manual of the APA (7th ed.).

• Birch, J. (2012). Worldwide prevalence of red-green color deficiency. Journal of the Optical Society of America A, 29(3), 313-320.

• Borland, D., & Taylor, R. M. (2007). Rainbow color map (still) considered harmful. IEEE Computer Graphics and Applications, 27(2), 14-17.

• Cousineau, D. (2005). Confidence intervals in within-subject designs: A simpler solution to Loftus and Masson's method. Tutorials in Quantitative Methods for Psychology, 1(1), 42-45.

• Crameri, F., Shephard, G. E., & Heron, P. J. (2020). The misuse of colour in science communication. Nature Communications, 11, 5444.

• Cumming, G., & Finch, S. (2005). Inference by eye: Confidence intervals and how to read pictures of data. American Psychologist, 60(2), 170-180.

• Kutas, M., & Federmeier, K. D. (2011). Thirty years and counting: Finding meaning in the N400 component. Annual Review of Psychology, 62, 621-647.

• Loftus, G. R., & Masson, M. E. J. (1994). Using confidence intervals in within-subject designs. Psychonomic Bulletin & Review, 1(4), 476-490.

• Luck, S. J. (2014). An Introduction to the Event-Related Potential Technique (2nd ed.). MIT Press.

• Miller, G. A. (1956). The magical number seven, plus or minus two. Psychological Review, 63(2), 81-97.

• Morey, R. D. (2008). Confidence intervals from normalized data: A correction to Cousineau (2005). Tutorials in Quantitative Methods for Psychology, 4(2), 61-64.

• Nuñez, J. R., Anderton, C. R., & Renslow, R. S. (2018). Optimizing colormaps with consideration for color vision deficiency to enable accurate interpretation of scientific data. PLoS ONE, 13(7), e0199239.

• Okabe, M., & Ito, K. (2002). Color universal design (CUD): How to make figures and presentations that are friendly to colorblind people. JFly Data Depository for Drosophila Researchers.

• Tufte, E. R. (2001). The Visual Display of Quantitative Information (2nd ed.). Graphics Press.

• Weissgerber, T. L., Milic, N. M., Winham, S. J., & Garovic, V. D. (2015). Beyond bar and line graphs: Time for a new data presentation paradigm. PLoS Biology, 13(4), e1002128.

See references/plot-recipes.md for concrete code recipes for each visualization type.