SSH Tunnel Debugger

You are diagnosing issues with SSH tunnels managed by the ssh-tunnels CLI. Follow this systematic approach to identify and fix the problem.

Step 1: Get the current state

ssh-tunnels status --json

Look for tunnels where enabled: true but alive: false or portOpen: false. These are the broken ones.

Step 2: Check the logs

For each broken tunnel:

ssh-tunnels logs <tunnel-id>

Step 3: Diagnose by error message

"Permission denied (publickey)"

Cause: Wrong SSH username or SSH key not authorized on the remote host. Fix:

ssh-tunnels remove <id>
ssh-tunnels add --name "Same Name" --host <host> --user root --localPort <port> --remoteHost <rhost> --remotePort <rport> --enabled

Try root first. If that doesn't work, ask the user what username they use to SSH into that server manually (ssh <user>@<host>).

"Connection refused"

Cause: SSH server is not running on the target host, or it's on a non-standard port. Checks:

# Test SSH connectivity directly
ssh -o ConnectTimeout=5 -o BatchMode=yes <user>@<host> echo "OK" 2>&1

If the SSH server is on a non-standard port, recreate the tunnel with --sshPort.

"Connection timed out" or "No route to host"

Cause: Host is unreachable — wrong hostname, firewall, or network issue. Checks:

# Test basic connectivity
ping -c 3 -W 5 <host> 2>&1
# Test SSH port specifically
nc -z -w 5 <host> <ssh-port> 2>&1 && echo "Port open" || echo "Port closed/filtered"

"Host key verification failed"

Cause: The server's host key changed or this is the first connection. Fix:

# Remove the old host key
ssh-keygen -R <host>
# The tunnel manager uses StrictHostKeyChecking=accept-new, so re-enabling should work
ssh-tunnels disable <id> && ssh-tunnels enable <id>

"bind: Address already in use"

Cause: Another process is already using the local port. Fix:

# Find what's using the port
lsof -i :<local-port> -P -n
# Either stop that process or change the tunnel's local port

To change the local port, remove and re-add the tunnel with a different --localPort.

"channel 0: open failed: connect failed: Connection refused"

Cause: The SSH tunnel is connected, but the remote service is not listening on the specified remoteHost:remotePort. Checks:

# SSH in and check if the service is running
ssh <user>@<host> "netstat -tlnp 2>/dev/null | grep <remote-port> || ss -tlnp | grep <remote-port>"

The remote service may be down, or --remoteHost / --remotePort may be wrong.

Empty log file or no log file

Cause: The SSH process crashed immediately or was never spawned. Checks:

# Check the PID file
cat ~/.ssh-tunnels/pids/<id>.pid 2>/dev/null
# Try a manual SSH connection to see what happens
ssh -v -N -L <localPort>:<remoteHost>:<remotePort> <user>@<host>

Step 4: Verify the fix

After making changes:

ssh-tunnels status --json

Confirm that alive: true and portOpen: true for the fixed tunnel.

Then test the actual connection through the tunnel:

# For PostgreSQL (port 5432)
pg_isready -h 127.0.0.1 -p <local-port> 2>&1 || echo "Not ready"

# For HTTP services
curl -s -o /dev/null -w "%{http_code}" http://127.0.0.1:<local-port>/ 2>&1

# For any TCP service (generic check)
nc -z -w 3 127.0.0.1 <local-port> && echo "Port responding" || echo "Port not responding"

Step 5: Check for systemic issues

If multiple tunnels are failing:

# Check if SSH agent is running and has keys loaded
ssh-add -l 2>&1

# Check if there's a network-level issue
# (all tunnels to the same host failing = host or network problem)
ssh-tunnels status --json | grep -E '"host"|"alive"'

# Force a full re-sync
ssh-tunnels sync

Step 6: Nuclear option — full reset

If nothing else works, reset a specific tunnel:

ssh-tunnels disable <id>
# Clean up any stale state
rm -f ~/.ssh-tunnels/pids/<id>.pid
ssh-tunnels enable <id>
ssh-tunnels logs <id>

Menu bar app issues

If the menu bar app is not showing or not updating:

# Check if it's running
pgrep -f "electron.*app.mjs" && echo "Running" || echo "Not running"

# Restart it
pkill -f "electron.*app.mjs"
# The LaunchAgent should restart it automatically, or:
launchctl unload ~/Library/LaunchAgents/com.statechange.ssh-tunnel-manager.plist 2>/dev/null
launchctl load ~/Library/LaunchAgents/com.statechange.ssh-tunnel-manager.plist

# Check launch agent status
launchctl list | grep statechange

Quick reference