SKILL: Lattice-Based Cryptanalysis — Expert Attack Playbook

AI LOAD INSTRUCTION: Expert lattice techniques for CTF and cryptanalysis. Covers LLL/BKZ reduction, Coppersmith's method (univariate and multivariate), Hidden Number Problem for DSA/ECDSA nonce recovery, knapsack attacks, and NTRU analysis. Base models often fail to construct the correct attack lattice (wrong dimensions, missing scaling factors) or misapply Coppersmith bounds.

0. RELATED ROUTING

• rsa-attack-techniques for RSA-specific attacks that use lattice methods (Coppersmith, Boneh-Durfee)
• symmetric-cipher-attacks for LCG state recovery via lattice
• classical-cipher-analysis when lattice methods apply to classical cipher analysis

Quick application guide

1. LATTICE FUNDAMENTALS

1.1 Definitions

A lattice L is the set of all integer linear combinations of basis vectors:

L = { a₁·b₁ + a₂·b₂ + ... + aₙ·bₙ | aᵢ ∈ ℤ }

where b₁, ..., bₙ are linearly independent vectors in ℝᵐ.

Key problems:

• SVP (Shortest Vector Problem): Find the shortest non-zero vector in L
• CVP (Closest Vector Problem): Given target t, find v ∈ L closest to t
• SVP is NP-hard in general, but LLL finds an approximately short vector in polynomial time

1.2 Lattice Quality Metrics

Determinant: det(L) = |det(B)| where B is the basis matrix
Gaussian heuristic: shortest vector ≈ √(n/(2πe)) · det(L)^(1/n)

2. LLL ALGORITHM

2.1 What LLL Does

Takes a lattice basis B and produces a reduced basis B' where:

• Vectors are nearly orthogonal
• First vector is approximately short (within 2^((n-1)/2) factor of SVP)
• Runs in polynomial time: O(n^5 · d · log³ B) where d = dimension, B = max entry size

2.2 SageMath Usage

# SageMath
M = matrix(ZZ, [
    [1, 0, 0, large_value_1],
    [0, 1, 0, large_value_2],
    [0, 0, 1, large_value_3],
    [0, 0, 0, modulus],
])

L = M.LLL()
# Short vectors in L reveal the solution
short_vector = L[0]  # first row is typically shortest

2.3 Python (fpylll)

from fpylll import IntegerMatrix, LLL

n = 4
A = IntegerMatrix(n, n)
# Fill matrix A...
A[0] = (1, 0, 0, large_value_1)
A[1] = (0, 1, 0, large_value_2)
A[2] = (0, 0, 1, large_value_3)
A[3] = (0, 0, 0, modulus)

LLL.reduction(A)
print(A[0])  # shortest vector

3. BKZ (BLOCK KORKINE-ZOLOTAREV)

3.1 Comparison with LLL

3.2 Usage

# SageMath
M = matrix(ZZ, [...])
L = M.BKZ(block_size=20)  # β = 20

# fpylll
from fpylll import BKZ
BKZ.reduction(A, BKZ.Param(block_size=20))

Rule of thumb: start with LLL, increase to BKZ if needed. BKZ block size 20-40 is usually sufficient for CTF.

4. COPPERSMITH'S METHOD

4.1 Univariate Case

Given f(x) ≡ 0 (mod N) with small root |x₀| < X, find x₀.

Bound: X < N^(1/d) where d = degree of f.

# SageMath — built-in small_roots
N = ...
R.<x> = PolynomialRing(Zmod(N))
f = x^3 + a*x^2 + b*x + c  # known polynomial
roots = f.small_roots(X=2^100, beta=1.0, epsilon=1/30)

Parameters:

• X: upper bound on the root
• beta: N = p^beta (beta=1.0 for modular root of N itself; beta=0.5 for root mod unknown factor p ≈ √N)
• epsilon: smaller = better results but slower (try 1/30 to 1/100)

4.2 Stereotyped Message Attack (RSA)

# SageMath
n, e, c = ...  # RSA parameters
known_msb = ...  # known upper portion of message

R.<x> = PolynomialRing(Zmod(n))
f = (known_msb + x)^e - c

# x represents the unknown lower bits
X = 2^(unknown_bit_count)
roots = f.small_roots(X=X, beta=1.0)
if roots:
    m = known_msb + int(roots[0])

4.3 Partial Key Exposure (Factor p)

Known MSBs of p: p = p_known + x where x is small.

# SageMath
n = ...
p_known = ...  # known upper bits of p

R.<x> = PolynomialRing(Zmod(n))
f = p_known + x
roots = f.small_roots(X=2^unknown_bits, beta=0.5)
# beta=0.5 because p ≈ √n
if roots:
    p = p_known + int(roots[0])
    q = n // p

4.4 Multivariate Coppersmith (Howgrave-Graham)

For f(x, y) ≡ 0 (mod N):

• No polynomial-time algorithm guaranteed
• Heuristic methods work in practice
• Used in Boneh-Durfee for RSA small d

# SageMath — Boneh-Durfee
# e*d ≡ 1 (mod phi) where phi = (p-1)(q-1)
# Rewrite: e*d = 1 + k*((n+1) - (p+q))
# Let x = k, y = (p+q), both small relative to n

R.<x, y> = PolynomialRing(ZZ)
A = (n + 1) // 2
f = 1 + x * (A + y)  # mod e

# Build shift polynomials and construct lattice
# Apply LLL to find small (x₀, y₀)

5. HIDDEN NUMBER PROBLEM (HNP) — DSA/ECDSA NONCE RECOVERY

5.1 Problem Statement

Given: signatures (rᵢ, sᵢ) where nonces kᵢ have known bias (leaked MSBs or LSBs).

DSA equation: s = k⁻¹(H(m) + xr) mod q

Rearranged: k = s⁻¹(H(m) + xr) mod q

If partial bits of k are known: reduces to CVP on a lattice.

5.2 Attack Setup

# SageMath
def ecdsa_nonce_attack(signatures, q, known_bits, bit_position='msb'):
    """
    signatures: list of (r, s, hash, known_nonce_bits)
    q: curve order
    known_bits: number of known bits per nonce
    """
    n = len(signatures)

    # Build lattice
    B = 2^(q.nbits() - known_bits)  # bound on unknown part
    M = matrix(QQ, n + 2, n + 2)

    for i in range(n):
        r_i, s_i, h_i, a_i = signatures[i]
        t_i = Integer(inverse_mod(s_i, q) * r_i % q)
        u_i = Integer(inverse_mod(s_i, q) * h_i % q)

        M[i, i] = q
        M[n, i] = t_i
        M[n+1, i] = u_i - a_i  # a_i = known nonce bits

    M[n, n] = B / q
    M[n+1, n+1] = B

    # LLL reduction
    L = M.LLL()

    # Find row containing the private key x
    for row in L:
        x_candidate = Integer(row[n] * q / B) % q
        # Verify x_candidate against one signature
        if verify_private_key(x_candidate, signatures[0], q):
            return x_candidate

    return None

5.3 Practical Nonce Bias Sources

For reused nonce (simplest case):

def ecdsa_reused_nonce(r, s1, s2, h1, h2, q):
    """Recover private key when nonce k is reused."""
    # s1 - s2 = k⁻¹(h1 - h2) mod q  (since r is same)
    k = ((h1 - h2) * inverse_mod(s1 - s2, q)) % q
    x = ((s1 * k - h1) * inverse_mod(r, q)) % q
    return x, k

6. KNAPSACK / SUBSET SUM ATTACKS

6.1 Low-Density Attack

Knapsack: given weights a₁,...,aₙ and target S, find x₁,...,xₙ ∈ {0,1} such that Σxᵢaᵢ = S.

Density d = n / max(log₂ aᵢ). If d < 0.9408, lattice attack works.

# SageMath
def knapsack_lattice(weights, target):
    """Solve subset sum via LLL lattice attack."""
    n = len(weights)

    # Build lattice (Lagarias-Odlyzko style)
    N = ceil(sqrt(n) / 2)  # scaling factor
    M = matrix(ZZ, n + 1, n + 1)

    for i in range(n):
        M[i, i] = 1
        M[i, n] = N * weights[i]
    M[n, n] = N * target

    # Alternative: CJLOSS embedding
    M2 = matrix(ZZ, n + 1, n + 2)
    for i in range(n):
        M2[i, i] = 1
        M2[i, n + 1] = N * weights[i]
    M2[n, n] = 1
    M2[n, n + 1] = N * (-target)

    L = M2.LLL()

    # Look for short vector with entries in {0, 1, -1}
    for row in L:
        if all(v in (0, 1) for v in row[:n]):
            solution = list(row[:n])
            if sum(solution[i] * weights[i] for i in range(n)) == target:
                return solution

    return None

7. NTRU CRYPTANALYSIS

7.1 NTRU Lattice

# SageMath
def ntru_lattice_attack(h, q, N):
    """
    Construct NTRU lattice for key recovery.
    h = public key polynomial (mod q)
    q = modulus
    N = dimension
    """
    # NTRU lattice:
    # | qI  0 |
    # | H   I |
    # where H is the circulant matrix of h

    H = matrix(ZZ, N, N)
    for i in range(N):
        for j in range(N):
            H[i, j] = h[(j - i) % N]

    M = block_matrix([
        [q * identity_matrix(N), zero_matrix(N)],
        [H, identity_matrix(N)]
    ])

    L = M.LLL()

    # Short vector in reduced basis = (f, g) private key
    for row in L:
        f = vector(row[:N])
        g = vector(row[N:])
        if f.norm() < q and g.norm() < q:
            return f, g

    return None

8. CONSTRUCTING ATTACK LATTICES — METHODOLOGY

8.1 General Recipe

1. Express the cryptographic problem as:
   "Find small x such that f(x) ≡ 0 (mod N)"
   or "Find x close to target t in some lattice L"

2. Choose lattice type:
   ├─ Polynomial lattice → Coppersmith-style
   ├─ Modular lattice → HNP-style CVP
   └─ Knapsack lattice → subset sum / CJLOSS

3. Determine dimensions:
   └─ More dimensions = better approximation but slower

4. Set scaling factors:
   └─ Balance the rows so short vector has roughly equal entries
   └─ Common: multiply by N/X where X is the root bound

5. Apply reduction:
   ├─ LLL first (fast, usually sufficient)
   └─ BKZ if LLL fails (increase block size: 20, 30, 40)

6. Extract solution:
   └─ Check reduced basis rows for valid solutions

8.2 Embedding Technique (CVP → SVP)

Transform CVP into SVP by embedding the target into the lattice:

# SageMath
def cvp_to_svp(basis_matrix, target, scale=1):
    """Convert CVP to SVP via Kannan's embedding."""
    n = basis_matrix.nrows()
    m = basis_matrix.ncols()

    # Augment matrix
    M = matrix(ZZ, n + 1, m + 1)
    for i in range(n):
        for j in range(m):
            M[i, j] = basis_matrix[i, j]
        M[i, m] = 0

    for j in range(m):
        M[n, j] = target[j]
    M[n, m] = scale  # scaling factor (try 1, then adjust)

    L = M.LLL()

    # Look for row with last entry = ±scale
    for row in L:
        if abs(row[m]) == scale:
            return vector(target) - vector(row[:m]) * (row[m] // abs(row[m]))

    return None

8.3 Dimension Selection Guide

9. DECISION TREE

Lattice approach needed — which construction?
│
├─ RSA-related?
│  ├─ Small unknown part of message → Coppersmith univariate
│  │  └─ Check: unknown_bits < n_bits / e
│  ├─ Partial factor knowledge → Coppersmith mod p
│  │  └─ Use beta=0.5, X=2^unknown_bits
│  ├─ Small private exponent d → Boneh-Durfee
│  │  └─ Check: d < N^0.292
│  └─ Multiple related equations → multivariate Coppersmith
│
├─ DSA/ECDSA-related?
│  ├─ Reused nonce → direct algebraic recovery (no lattice needed)
│  ├─ Partial nonce leakage → HNP → CVP lattice
│  │  └─ Need enough signatures: n ≥ q_bits / leaked_bits
│  └─ Nonce bias → statistical HNP → larger lattice
│
├─ Knapsack / subset sum?
│  ├─ Low density (d < 0.9408) → CJLOSS lattice attack
│  ├─ High density → lattice attack unlikely to work
│  └─ Super-increasing → greedy algorithm (no lattice needed)
│
├─ LCG / PRNG?
│  ├─ Full outputs known → algebraic recovery (no lattice)
│  ├─ Truncated outputs → CVP on recurrence lattice
│  └─ Unknown modulus → use GCD of output differences
│
├─ NTRU?
│  └─ Build circulant lattice → LLL/BKZ for short key vector
│
└─ Custom problem?
   ├─ Express as "find small root of polynomial mod N" → Coppersmith
   ├─ Express as "find lattice point close to target" → CVP
   ├─ Express as "find short vector in lattice" → SVP / LLL
   └─ If none fit → probably not a lattice problem

10. COMMON PITFALLS